原文：
          高、低加热器疏水阀给水加热器疏水、柱塞阀 冷凝水加热器疏水 　　 控制要求：控制加热器中冷凝水的位置，旋塞阀 及时将冷凝水排放，即高水位排放，正常水位疏水。

 　　 工况情况：介质为饱和水，疏水阀加热器之间的控制阀压差一般为6-30公斤，呼吸阀最后一级疏水阀直接连接冷凝器或除氧器。 　　 阀门要求：抗闪蒸冲刷，平衡阀v或vi级密封等级，阀门通常为故障开。

“ High and low heater selection for trap ”是由中国疏水阀网提供的国际阀门新闻，译文仅供参考。另外，中国疏水阀网还提供相关产品搜索： 钟形浮子式疏水阀、 圆盘式疏水阀、 热静力式疏水阀、 热动力式疏水阀、 更多疏水阀产品等。

译文：
        High and low trap water heater Heater,Filters Condensate Heater Control requirements: Control the location ofAPI Cast Steel Valves condensed water heater, condensate discharge in time, that high water discharge, the normal water level of hydrophobicity. Conditions: The medium is saturatedWater power control valves water heater control valve between the pressure is generally 6-30 kg, and finally a trap directly connected to the Forged Steel Valvescondenser or deaerator. Valve requirements: flash erosion resistance,Reducing Valves v or vi-level seal level, the valve is usually opened for the failure.

原文来源：http://www.1shushuifa.com/

2010-08-25 07:43

返回